The Magnetic Generator is complex system with an organized structural arrangement of permanent magnets and bifilar coils and PCB controller with a specially designed software that are used to generate and dispense electrical energy.
Initial start is performed by a battery or any other external source of energy to help motor reach needed RPM. After that the external source can be disconnected.
The device is able to operate in autonomous mode and maintain its RPM regardless of amount of useful energy being consumed.
The magnetic generator MG10 consists of 60 neodymium magnets and 60 bifilar coils. The constructional feature that enables generating electrical energy is the precise angular alignment of the coils and magnets inside the drum and the switching regulations to suppress back EMF and effectively collect accumulated energy inside the electromagnets (coils). As a magnet starts approaching a coil, at a certain point the voltage of the coil increases along with the amount of charge it can transfer. Once the switching regulator detects the maximum voltage of the coil, it switches off the coil. The magnetic field of the coil that has been formed after excitation of the coil will tend to collapse generating a back EMF in the coil windings.
The designed software of the generator is able to suppress the parasitic current and transform it into usable electrical energy that can be utilized by the end user.
Warranty: will be determined by a distributor but at least 2 years
AS service: will be provided by a distributor in your country
up to 8000 hours until maintenance
at least 10 years
60dB without soundproof casing
insignificant with internal cooling
KC and CE marks are in the process of acquisition
Operation temp range
with heatproof casing up to 70°C for hot countries, with coldproof casing down to -40°C
will be determined by a distributor but at least 2 years
|Total capacity||6550 W|
|Control system consumption||50W|
|Motor consumption||Idle – 200W, full load – 3KW|
|Generated voltage||900 AC|
|Effective voltage output||110V / 1 phase / 50A
220-230V / 1 phase / 25A
220-230V / 3 phase / 8A
380-440V / 3 phase / 8A
|Effective power output||5KW|
|Effective frequency output||50/60Hz|
|Motor rotation||1500 rpm|
|Operation temperature range||-40°C ~ 70°C|
|Recommended retail price||Refer to FAQ|
One of the distributor’s responsibilities will be to provide after-sales service to the clients which includes regular maintenance. The device will have a complex system of sensors and gauges that will indicate when and what service must be performed on the device. According to our calculations, every 8000 operational hours the device should undergo preventive maintenance which will be performed by trained technicians of a distributor’s company. The technicians will replace/grease/inspect all moving and electronic parts of the generator.
Constant magnets and bifilar coils can generate this energy without any effort because there is no anti-moving driving force.
These devices can be used in production sector, private sector, automotive industry, agriculture sector, shipbuilding industry, aviation, military, space basically anywhere where people need electricity.
The magnetic generator is able to operate in 24/7 mode with proper operation and maintenance. The generator must be installed in a dry room.
According to our calculations it will last for at least 200,000 operational hours. If maintenance is performed regularly and duly, the generator may serve indefinitely longer.
The noise level in the working condition reaches 50-60 dB, if necessary, the distributor can order the required number of units with a special casing cover up to 30 dB
One of the clear advantages of the Infinity SAV’ MG system is that they do not need to be refueled or charged as it happens in traditional generating sets. Additionally, rest rental periods to allow cooling are not necessary. All Infinity SAV’ MG generators are air-cooled and do not require you to turn them off after extended run times. However, you will need to turn off the unit before service maintenance which should be done on a regular basis after extended use.
Just like any other electrical device, the generator will undergo safety tests to acquire necessary certificates that will indicate its safety for everyday use at home, office, stores, factories, etc.
One of the advantages of the Infinity SAV’ MG system is that they are designed and equipped with an additional battery. This battery allows you to use the stored energy at peak loads in the network to prevent the generator from overloading at such times.
Most average homes of 1200 to 3000 sq. ft. can run critical items in the home by using a 5000 – 7000-watt generator. The most common items that need emergency power during a blackout would be the furnace blower motor, refrigerator, freezer, lights, TV, sump pump, and water pumps. Infinity SAV’ MG Generator Systems in the 10kW will quietly supplies to your home automatically, giving your family the power, freedom & comfort of their usual lifestyle, uninterrupted by power failure.
Yes. Generator MG does not emit any harmful aerosol or gaseous substances.